The signage industry has a visibility problem, with mechanical fasteners. Every screw, rivet, and bracket is a potential eyesore on an otherwise clean fascia. Acrylic foam tape solves this by creating a permanent, invisible bond that's strong enough for outdoor signage in the Gulf climate.
How Acrylic Foam Tape Differs from Standard Double-Sided Tape
Standard double-sided tape is thin and rigid, it can't compensate for surface irregularities, and it loses strength under heat. Acrylic foam tape has a thick foam core (typically 0.8mm–3mm) coated on both sides with acrylic adhesive. The foam conforms to surface variations, distributes stress evenly, and maintains adhesion at temperatures up to 90°C.
Bond Strength for Common Signage Substrates
| Substrate | Recommended Tape | Bond Strength |
|---|---|---|
| ACP (Aluminium Composite Panel) | 1.2mm grey foam | Very High |
| Acrylic / Perspex | 0.8mm white foam | High |
| Glass | 1.0mm clear acrylic | High |
| Powder-coated steel | 1.2mm grey foam | Very High |
| Concrete / masonry | 3mm foam + primer | Medium–High |
Application Tips for Maximum Bond
Clean both surfaces with IPA (isopropyl alcohol) before bonding. Apply firm, even pressure for 30 seconds across the full bond area. Full cure strength is achieved after 24–72 hours, avoid stress on the joint during this period. In temperatures below 15°C, pre-warm surfaces for better initial adhesion.
Specify foam tape for your next signage project? Request samples or a quote from AIPL.
Get in Touch
